PDF《产品规格书》

2 PAGE:

4 /

8 5 参数范围 Parameter Ratings:

6 产品性能 Performance 6.1 机械性能 Mechanical 序号 No. 项目Item 测试条件 Test Condition 规格Requirement 6.1.1 外观 Appearance 目测 Checking by eye 视力:1.0 以上 Eyesight: > 1.0 照明: (200~300)lx Lamp: (200~300)lx 目测距离: (0.3~0.5)m Space: (0.3~0.5)m GB/T 5095.1 Method 1a

1 塑料件表面应无明显疤痕、凹陷、开裂及影响使用 的变形,按压塑件倒钩,无损伤. Plastic part: smooth and flat surface without discolor, broken, crack, and distortion, the hook can work when it is pressed.

2 金属件表面无锈蚀、氧化 、无明显的机械损伤等缺 陷. Metal part: bright and even surface without rust, oxide, fog and obvious physical damage, etc. 6.1.2 插入力与拔出 力Insertion and Withdrawal Force of Receptacle 固定插片(4.8*0.5)和测力计,在连接器轴线方向 插入和拔出;

速度25±3mm/min. Apply axial insert and withdraw on the tab (4.8*0.5) in the receptacle at a rate of 25±3 mm/ min. GB/T 5095.7 Method 13b / EIA-364-13B 去锁扣 Without lock 首次插入力 (First Insertion) Max 首次拔出力 (First Withdrawal) Min 六次拔出力 (6th Withdrawal) Min 25N 5N 4N 带锁扣 with lock 60N Min 6.1.4 端子的插入力 与固定力 Insertion force and Retention Force for Receptacle in the housing 固定连接器和测力计,在连接器轴线方向插入和 拔出;

速度 25±3mm/min. Axial Insert and withdraw force on the receptacle in the housing at a rate of 25±3 mm/ min. GB/T 5095.8 Method 15d / EIA-364-29B 插入力 (Insertion) Max. 固定力(Retention) Min. 6.8N 50N 额定电流 Rated Current 7A 额定电压 Rated Voltage 250V [AC(有效值 rms)/DC] 使用温度范围 Operating temperature range -25℃~+85℃(含温度上升) 适用线型 Applicable wires Wire Size:AWG 22~AWG 16(0.33 mm?-1.31 mm?) Insulation Diameter:1.6mm-3.1mm 产品规格书 PRODUCT SPECIFICATION 产品名称 Product Name: TR4.8*0.5G 系列 编号 Document No. PS3925 版本号 VersionNo.

2 PAGE:

5 /

8 6.1.3 压着部位抗张 强度 Crimping Pull Out Force 在试验装置夹头中固定试验样品,在连接的轴线 方向施加张力,速度25±3mm/min;

Fix the crimped receptacle, Axial pull out force on the receptacle in the wire at a rate of 25±3 mm/ min. GB/T5095.8 Method 16d / EIA-364-08B AWG 22#:

40 N Min. AWG 20#: 57.9 N Min. AWG 18#: 89N Min. AWG 16#: 133.5N Min. 6.1.5 机械振动 Vibration 插合连接器,串联在一直流电源上,电流100mA;

并模拟正常工作状态;

振频为 (10~55~10) Hz, 每个循环时间为1分钟,振幅1.52mm.沿XYZ三 轴正反方向各循环2h. Mated connectors subjected to following vibration conditions, for a period of

2 hours in each of

3 mutually perpendicular axes,

100 mA current shall be applied. Frequency: (10~55~10)HZ/min. Amplitude: 1.52mm GB/T 5095.4 Method 6d / EIA-364-28D 外观:无损伤(参照6.1.1) Appearance: No damage.( refer to 6.1.1) 接触电阻:0.02Ω Max. Contact resistance: 0.02Ω Max. 中断: 1μsec Max.