PDF《目录明细单》

3 pieces

1 piece

1 copy

1 copy

3 Use condition and attentions in construction Use condition Warning Cold water supply*hot water supply pressure: Minimum pressure………………0.15MPa(flow pressure) Maximum pressure………………0.75MPa(static pressure) Recommended Operating pressure…………0.15-0.5MPa(flow pressure) The temperature for water supply is 4~60℃. It is suggested to use the temperature below 60℃. Do not use steam to supply hot water. The ambient temperature for use is 1~40℃. If the ambient temperature is lower than 0℃, the faucet will deform and crack from freezing. To prevent internal sprinkler damage, the water outlet temperature on the sprinkler side shall not exceed 60℃. It is suggested to use a temperature below 45℃. Being out of use for a long time may result in internal and external rust to the faucet and being unable to be used. If you want to scrap this product, do not treat it as you do for general household garbage. Please follow relevant statutes to have it treated, recovered and collected appropriately by an independent recovery system. The product in these instructions has a cleaning function. The hot water supply side of the faucet is in a condition of high temperature. Do not allow skin to contact with the hardware surface directly. Otherwise, scalding may occur. Do not reverse cold*hot water pipes. Otherwise, scalding may occur. Do not use steam to supply hot water. Otherwise, scalding may occur. Tle water temperature will change when switch from spout to shower or switch from shower to spout.The user should test it by hand.Otherwise, scalding may occur. 1. 2. 3. 4. 1. 2. 3. 4. 5. 6. 7. Attentions in construction Warning: it means that ignoring this mark and misoperation may cause serious personal injury and death. Attention: it means that ignoring this mark and misoperation may cause personal injury or property loss. Attentions in construction and maintenance

4 Maintenance To maintain a beautiful appearance of the product, the user is requested to conduct maintenance and care in the following method. Wipe with a piece of soft cloth frequently and use a piece of soft cloth dipped in water to wipe from time to time. When dirt exists obviously, please use water to wash sufficiently after wiping with a neutral detergent. 1. 2. Perpendicular Level gauge Level Buried part (to be separately purchased) Fixing connector Attentions The buried part (TBN01002*) must be used for construction of this commodity. The buried part must use the fixing connector in TBN01002*. Construction on wall surface is carried out before construction of this commodity. Before construction to this commodity, the buried part to which construction is carried out beforehand must not swing. The buried part is perpendicular from top to bottom and from left to right. Use a level gauge to confirm levelness. In case that the buried part construction is not correct, this commodity will swing, incline, etc. Please do not impact this product. Otherwise, failure, water leakage may be caused. With the product style being updated constantly, the physical object may not be inconsistent with the illustration. However, the basic installation and principle of use are the same. 1. 2. 3. 4. 5. 6.

5 Installation Completion Figure TBW01005* series Fixed showerhead (bath ? air mingling in ? double function) 387~413 G1/2 The in the figure is according to the buried part depth variation. Note: The above dimensional unit is mm;

the dimensions in ( ) are reference ones. φ270(Maximum apron diameter) φ300

50 (53) (53)