PDF《PART 45. FALL PROTECTION》

29 C.F.R. § 1926.500 Scope, Application, and definitions applicable to this subpart, effective July 10, 2014. (b)

29 C.F.R. § 1926.501 Duty to have fall protection, effective January 26, 1995. (c)

29 C.F.R. § 1926.502 Fall protection systems criteria and practices, effective January 26, 1995. (d)

29 C.F.R. § 1926.503 Training requirements, effective January 26, 1995. (2) The standards adopted in subrule (1) of this rule are available from the United States Department of Labor, Occupational Safety and Health Administration website: www.osha.gov, at no charge as of the time of adoption of these rules. (3) The standards adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section,

7150 Harris Drive, Lansing, Michigan, 48909- 8143. (4) The standards adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section,

7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143, plus $20.00 for shipping and handling. (5) The following Michigan occupational safety and health (MIOSHA) standards are referenced in these rules. Up to

5 copies of these standards may be obtained at no charge from the Michigan Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section,

7150 Harris Drive, P.O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, as of the time of adoption of these rules, is

4 cents per page. (a) Construction Safety Standard Part 10. Lifting and Digging Equipment, R 408.41001 to R 408.41099a. (b) Construction Safety Standard Part 11. Fixed and Portable Ladders, R 408.41101 to R 408.41140. (c) Construction Safety Standard Part 12. Scaffolds and Scaffold Platforms, R 408.41201 to R 408.41264. (d) Construction Safety Standard Part 14. Tunnels, Shafts, Caissons, and Cofferdams, R 408.41401 to R 408.41483. (e) Construction Safety Standard Part 16. Power Transmission and Distribution, R 408.41601 to R 408.41658. (f) Construction Safety Standard Part 21. Guarding of Walking and Working Areas, R 408.42101 to R 408.42160. (g) Construction Safety Standard Part 26. Steel Erection, R 408.42601 to R 408.42656. (h) Construction Safety Standard Part 32. Aerial Work Platforms, R 408.43201 to R 408.43220.

3 Table of Contents for Adopted OSHA Rules: OSHA FALL PROTECTION.4 1926.500 SCOPE, APPLICATION, AND DEFINITIONS APPLICABLE TO THIS SUBPART

4 1926.500(a) Scope and application.4 1926.500(b) Definitions.4 1926.501 DUTY TO HAVE FALL PROTECTION

7 1926.501(a) General.7 1926.501(b)7 1926.501(c) Protection from falling objects.8 1926.502 FALL PROTECTION SYSTEMS CRITERIA AND PRACTICES.9 1926.502(a) General.9 1926.502(b) Guardrail systems.9 1926.502(c) Safety net systems.10 1926.502(d) Personal fall arrest systems.10 1926.502(e) Positioning device systems.12 1926.502(f) Warning line systems.12 1926.502(g) Controlled access zones.13 1926.502(h) Safety monitoring systems.14 1926.502(i) Covers.14 1926.502(j) Protection from falling objects.14 1926.502(k) Fall protection plan.15 1926.503 TRAINING REQUIREMENTS

16 1926.503(a) Training Program.16 1926.503(b) Certification of training.16 1926.503(c) Retraining.16 APPENDIX A - DETERMINING ROOF WIDTHS NON-MANDATORY GUIDELINES FOR COMPLYING WITH 1926.501(B)(10)17 Example A - Rectangular Shaped Roofs

17 Example B - Sloped Rectangular Shaped Roofs.17 Example C - Irregularly Shaped Roofs With Rectangular Shaped Sections