PDF《PART 45. FALL PROTECTION》

18 Example D - Separate, Non-Contiguous Roof Areas.19 Example E - Roofs With Penthouses, Open Courtyards, Additional Floors, Etc.20 Example F - Irregular, Non-Rectangular Shaped Roofs

21 APPENDIX B - GUARDRAIL SYSTEMS NON-MANDATORY GUIDELINES FOR COMPLYING WITH 1926.502(B)22 (1) For wood railings

22 (2) For pipe railings

22 (3) For structural steel railings

22 APPENDIX C - PERSONAL FALL ARREST SYSTEMS NON-MANDATORY GUIDELINES FOR COMPLYING WITH 1926.502(D)23 I. Test methods for personal fall arrest systems and positioning device systems.23 II. Additional non-mandatory guidelines for personal fall arrest systems.24 APPENDIX D - POSITIONING DEVICE SYSTEMS NON-MANDATORY GUIDELINES FOR COMPLYING WITH 1926.502(E)28 I. Testing Methods For Positioning Device Systems.28 II. Inspection Considerations.28 APPENDIX E SAMPLE FALL PROTECTION PLAN NON-MANDATORY GUIDELINES FOR COMPLYING WITH 1926.502(K)29 I. Statement of Company Policy.29 II.Fall Protection Systems to Be Used on This Project

30 III. Implementation of Fall Protection Plan.32 IV. Conventional Fall Protection Considered for the Point of Erection or Leading Edge Erection Operations

33 V. Other Fall Protection Measures Considered for This Job

38 VI. Enforcement

38 VII. Accident Investigations.38 VIII.Changes to Plan

38 IV. Accident Investigations.41 V. Changes to Plan

41 4 OSHA FALL PROTECTION 1926.500 SCOPE, APPLICATION, AND DEFINITIONS APPLICABLE TO THIS SUBPART 1926.500(a) Scope and application. 1926.500(a)(1) This subpart sets forth requirements and criteria for fall protection in construction workplaces covered under

29 CFR part 1926. Exception: The provisions of this subpart do not apply when employees are making an inspection, investigation, or assessment of workplace conditions prior to the actual start of construction work or after all construction work has been completed. 1926.500(a)(2) Section 1926.501 sets forth those workplaces, conditions, operations, and circumstances for which fall protection shall be provided except as follows: 1926.500(a)(2)(i) Requirements relating to fall protection for employees working on scaffolds are provided in subpart L of this part. 1926.500(a)(2)(ii) Requirements relating to fall protection for employees working on cranes and derricks are provided in subpart CC of this part. 1926.500(a)(2)(iii) Fall protection requirements for employees performing steel erection work (except for towers and tanks) are provided in subpart R of this part. 1926.500(a)(2)(iv) Requirements relating to fall protection for employees working on certain types of equipment used in tunneling operations are provided in subpart S of this part. 1926.500(a)(2)(v) Requirements relating to fall protection for employees engaged in the erection of tanks and communication and broadcast towers are provided in § 1926.105. 1926.500(a)(2)(vi) Subpart V of this part provides requirements relating to fall protection for employees working from aerial lifts or on poles, towers, or s........