PDF《MBRB15H45CT》

25 °C - 0.63 V IF = 7.5 A TJ =

125 °C 0.50 0.55 IF =

15 A TJ =

25 °C - 0.75 IF =

15 A TJ =

125 °C 0.61 0.66 Maximum reverse current per diode IR (2) Rated VR TJ =

25 °C -

50 μA TJ =

125 °C 3.0

10 mA THERMAL CHARACTERISTICS (TC =

25 °C unless otherwise noted) PARAMETER SYMBOL MBRB15H45CT UNIT Maximum thermal resistance per diode R?JC 3.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-263AB MBRB15H45CTHE3_B/P (1) 1.35 P 50/tube Tube TO-263AB MBRB15H45CTHE3_B/I (1) 1.35 I 800/reel Tape and reel

0 0

5 10

15 20

25 50

75 100

125 150

175 Average Forward Current (A) Case Temperature (°C)

10 1

100 25

50 75

100 125

150 175 TJ = TJ max. 8.3 ms Single Half Sine-Wave Number of Cycles at

60 Hz Peak Forward Surge Current (A) MBRB15H45CT www.vishay.com Vishay General Semiconductor Revision: 26-Sep-2018

3 Document Number:

88782 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig.

3 - Typical Instantaneous Forward Characteristics Per Diode Fig.

4 - Typical Reverse Characteristics Per Diode Fig.

5 - Typical Junction Capacitance Per Diode Fig.

6 - Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) 0.01 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2

0 1

10 100 TJ =

150 °C TJ =

125 °C TJ =

25 °C Instantaneous Forward Voltage (V) ) A ( t n e r r u C d r a w r o F s u o e n a t n a t s n I

0 6

0 0

0 1

0 4

80 0.0001 0.001 0.1 0.01

1 10 TJ =

150 °C TJ =

125 °C TJ =

25 °C Percent of Rated Peak Reverse Voltage (%) k a e L e s r e v e R s u o e n a t n a t s n I e g a ) A m ( t n e r r u C

20 1

0 0

1 0

1 1 .

0 100

1000 10

1 TJ =

25 °C f = 1.0 MHz Vsig =

50 mVp-p Reverse Voltage (V) ) F p ( e c n a t i c a p a C n o i t c n u J 0.01 0.1 0.1

1 1

10 10 t - Pulse Duration (s) Transient Thermal Impedance (°C/W) D2PAK (TO-263AB) Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) MIN. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min.

1 2 K K 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29)

0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. Legal Disclaimer Notice www.vishay.com Vishay Revision: 01-Jan-2019

1 Document Number:

91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. ?