PDF《Important safety instructions》

HD2061 Register your product and get support at www.

philips.com/welcome Important safety instructions

1 Overview

3 Use the appliance Warning ? If you wish to cancel a function once it is selected, do not lift the top unit to prevent the facial scalding.You can unplug the power cord, re-plug it, and then select another function. Make soymilk ? Measure ingredients as instructed.You can adjust the quantity to fit your personal taste. ? For 2-4 servings.

1 Take a cup of dry soybeans with supplied measuring cup and wash it thoroughly. ? To extend the life of the blade, soak the soybeans (8-9 hours in fall and spring, 6-7 hours in summer, and 9-10 hours in winter) and wash it thoroughly before processing.

2 Put the soybeans evenly at the bottom of the pot.

3 Pour water into the pot. Make sure that the water level is between MAX (the maximum level indication) and MIN (the minimum level indication).

4 Put the top unit into the pot. Make sure that the upper plug is correctly inserted into the connector.

5 Open the power connection cover, insert the power cord, and connect the power. ? ? The indicators flash in cycle, indicating that the power is connected.

6 Press Select to select Soymilk. ? ? The Soymilk indicator lights up.

7 Press Start. ? ? The In Progress indicator flashes and the appliance sounds once, indicating that processing starts. ? ? After about

25 minutes, you will hear

6 beeps and the Keep Warm indicator will light up indicating that soymilk is ready.The appliance will automatically enter keep warm mode.This lasts for an hour, and then automatically stops (see the Keep warm section).

8 After processing, disconnect the power. Hold the handle of the pot tightly with one hand and lift the top unit with the other hand.

9 Filtrate soymilk with the filter and it is ready to serve.You can add some sugar before serving. Tips ? To shorten the processing time, you can add warm water no hotter than 70°C. ? Soymilk can also be served without being filtrated. Make five grains soymilk ? Measure ingredients as instructed.You can adjust the quantity to fit your personal taste. ? For 2-4 servings.

1 Measure 30g of soybeans (around 1/2 cup) and 50g of rice (around 1/2 cup) with the supplied measuring cup. Wash them thoroughly. ? To extend the life of the blade, soak the soybeans (8-9 hours in fall and spring, 6-7 hours in summer, and 9-10 hours in winter) and wash it thoroughly before processing.

2 Put the rice and the soybeans evenly at the bottom of the pot.

3 Pour water into the pot. Make sure that the water level is between MAX (the maximum level indication) and MIN (the minimum level indication).

4 Put the top unit into the pot. Make sure that the upper plug is correctly inserted into the connector.

5 Open the power connection cover, insert the power cord, and connect the power. ? ? The indicators flash in cycle, indicating that the power is connected.

6 Press Select to select Five Grains Soymilk. ? ? The Five Grains Soymilk indicator lights up.

7 Press Start. ? ? The In Progress indicator flashes and the appliance sounds once, indicating that processing starts. ? ? After about

26 minutes, you will hear

6 beeps and the Keep Warm indicator will light up indicating that soymilk is ready.The appliance will automatically enter keep warm mode.This lasts for an hour, and then automatically stops (see the Keep warm section).

8 After processing, disconnect the power. Hold the handle of the pot tightly with one hand and lift the top unit with the other hand.

9 Pour soymilk into the cup, and it is ready to serve.You can add some sugar before serving. Tip ? To shorten the processing time, you can add warm water no hotter than 70°C. Make rice paste ? Measure ingredients as instructed.You can adjust the quantity to fit your personal taste. ? Example recipes: lily bulb and barley rice paste, for 2-4 servings.