PDF《Important safety instructions》

1 Measure 35g of barley and 35g of rice (around 2/5 cup each) with supplied measuring cup.Then, take 20g of fresh lily bulbs (around 7-8 pieces).Wash them thoroughly.

2 Put the lily bulbs, barley, and rice evenly at the bottom of the pot.

3 Pour water into the pot. Make sure that the water level is between MAX (the maximum level indication) and MIN (the minimum level indication).

4 Put the top unit into the pot. Make sure that the upper plug is correctly inserted into the connector.

5 Open the power connection cover, insert the power cord, and connect the power. ? ? The indicators flash in cycle, indicating that the power is connected.

6 Press Select to select Rice Paste. ? ? The Rice Paste indicator lights up.

7 Press Start. ? ? The In Progress indicator flashes and the appliance sounds once, indicating that processing starts. ? ? After about

26 minutes, you will hear

6 beeps and the Keep Warm indicator will light up indicating that soymilk is ready.The appliance will automatically enter keep warm mode.This lasts for an hour, and then automatically stops (see the Keep warm section).

8 After processing, disconnect the power. Hold the handle of the pot tightly with one hand and lift the top unit with the other hand.

9 Pour rice paste into the cup, and it is ready to serve.You can add some sugar before serving. Tip ? To shorten the processing time, you can add warm water no hotter than 70°C. Make fruit/ veggie drink ? Measure ingredients as instructed.You can adjust the quantity to fit your personal taste. ? Example recipe: banana milkshake, for 2-4 servings.

1 Cut

3 bananas (about 400g) into

1 cm cubes.

2 Put the banana cubes evenly at the bottom of the pot.

3 Pour 300ml of milk and some water into the pot. Make sure that the water mark is between MAX (the maximum level indication) and MIN (the minimum level indication).

4 Put the top unit into the pot. Make sure that the upper plug is correctly inserted into the connector.

5 Open the power connection cover, insert the power cord, and connect the power. ? ? The indicators flash in cycle, indicating that the power is connected.

6 Press Select to select Fruit/Veggie Drink. ? ? The Fruit/Veggie Drink indicator lights up.

7 Press Start. ? ? The In Progress indicator flashes and the appliance sounds once, indicating that processing starts.After about

4 minutes, you will hear

6 beeps, indicating that milkshake is ready.

8 After processing, disconnect the power,. Hold the handle of the pot tightly with one hand and lift the top unit with the other hand.

9 Pour banana milkshake into the cup, and it is ready to serve.You can add some sugar before serving. Tips ? After banana milkshake is ready, serve at once to avoid oxidization. ? Wait about

10 minutes until the appliance cools down before the next use. This makes the appliance more durable. Keep Warm After soymilk or rice paste is made, you will hear

6 beeps and the Keep Warm indicator will light up. The keep warm function lasts for an hour, and then automatically stops. Tips ? If you lift the top unit as soon as processing is complete, the appliance does not start the keep warm function. ? The appliance does not start the keep warm function at the completion of fruit/veggie drink. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. All rights reserved. ?

2012 Koninklijke Philips Electronics N.V. UM Leaflet_HD2061 TW WK1245.1