PDF《物理 分册》

2017 广告目次Sponsored by Shanghai Research Institute of Materials Published by Periodical Office of Physical Testing and Chemical Analysis Edited by Physical Testing Editorial Department, PTCA Address:

99 Handan Road, Shanghai 200437, China Tel: 0086-021-65556775 Ext.361 Fax: 0086-021-65544911 E-mail: [email protected] Website: http://www.mat-test.com CONTENTS 目次 Uniformly Distributed Sub-microsized Galinstan Liquid Metal Microspheres Prepared by Ultrasoic Method ZHANG Peitong, LIU Yiwei, GUO Qiang, LIU Gang, LI Runwei(701) Prediction Models for Room Temperature Tensile Strength of TC4 Titanium Alloy with Equiaxed Structure Based on Element Compositions WANG Fei, ZHOU Yinyu, ZHANG Chao(707) Effects of Stress Intensity Factor Range for Fabricating Fatigue Pre-cracks on Fracture Toughness of Ultra-High Strength Steel LIU Xiaoju, LIU Xulong, XUE Qinghe(712) Measurement Uncertainty Evaluation on Fatigue Testing Results RAN Xuechen(717) Failure Analysis on Fracture of

304 Stainless Steel Flange Connecting Bolts of a Liquid Ammonia Storage Tank SHI Baoliang, LI Yan, ZHANG Tengfei, JIANG Kehong, OUYANG Wei(740) Reason Analysis on Fracture of 60Si2MnA Steel Spring during Pressure Testing WANG Junlin, HAN Rongdong, OUYANG Minlu, XIONG Fei, WANG Zhifen(746) Cause Analysis on Significant Decrease of Impact Toughness of Nitronic

50 Stainless Steel at Cryogenic Temperature SUN Dewen, CHEN Wanhua, ZHU Changjiang, MOU Zhichao(750) Failure Analysis on Cracking of an Aluminum Alloy Flange for Current Transformer XIA Xiaojian, ZHANG Konglin, LIN Deyuan(754) Failure Analysis on Fracture of the Water-Cooling Wall Tube in a Thermal Power Plant WANG Zhaomin, CHENG Yi(757) Cause Analysis on Cracks of an X-ray Protection Box Used for CT Machines GAO Jinzhu, GAI Xiuying(761) Reason Analysis on Bursting of the Inlet Heating Surface Pipe of a Boiler's Cyclone Separator GE Hao, JIN Nanhui, LIU Jie, ZHAO Li(765) Failure Analysis on Fracture of Flange Sealing Bolts HAN Kejia, CAO Ying, ZHAO Xiaohui(768) Quality Control and Failure Analysis 封面 美特斯工业系统(中国)有限公司 封二- 第23届中国国际质量控制与 测试工业设备展览会 彩色内页(前插)-----(P1-24) 弈镁(上海)贸易有限公司

1 上海申力试验机有限公司 2-3 苏州费马科仪自动化技术有限公司

4 北京普瑞赛司仪器有限公司

5 高铁检测仪器(东莞)有限公司 6-7 齐齐哈尔华工机床有限公司 8-11 飞雅贸易(上海)有限公司

12 奥林巴斯(中国)有限公司

13 深圳三思纵横科技股份有限公司

14 武汉三灵新材料有限责任公司

15 上海察微电子技术有限公司

16 杭州朗杰测控技术开发有限公司

17 无锡市港下精密砂纸厂 18-19 德华材料检测有限公司

20 北京优森鼎盛光学技术有限公司

21 上海光相制样设备有限公司

22 博势商贸上海有限公司

23 DOLI

24 黑白内页-P25-26) 韶关市先标实验设备有限公司

25 北京海淀万泰机电技术开发公司

26 彩色内页(后插)----(P27-30) 大连希望设备有限公司

27 上海金相机械设备有限公司

28 上海材料研究所科技期刊杂志社

29 上海齐宝数控机床制造有限公司

30 封三 上海尚材试验机有限公司 封底 天氏欧森测试设备(上海)有限公司 Test and Investigation Failure Analysis on Mechanical Equipments (Continued) Lecture

7 Electron Optical Analysis Technique WANG Rong(691) Special Subject Review Research and Development Status of Preparation Processes of WC Particle Reinforced Metal Matrix Composite Coatings BA Fahai, LI Kai, WANG Fei, ZHANG Chao(720) Analysis on Common Failure Modes of High-Pressure Fuel Injection Pipes in Automobile Engines JIANG Yaya, FENG Jijun(725) Influence Factors and Protective Measures of Oxide Scale Growth and Exfoliation of High Temperature Heat-Absorbing Surface for Supercritical (Ultra-Supercritical) Boilers WEI Limin, LIU Chao, CHENG Yi, TAN Shuping(731) Analysis on Non-conformance Cases during Accreditation Application of Metal Material Testing Laboratories GUO Miao, LIU Lidong, LIU Jia, PAN Feng, ZHU Xiaoyu(737) Laboratory Accreditation