PDF《Murata Bluetooth mesh Node》

1PR-DG Rev.

1.2 Page

1 Subject to change without notice. Copyright ? Murata Manufacturing Co., Ltd. All rights reserved. Murata Bluetooth mesh Node OEM Design-in Guide 1PR-DG Rev. 1.2 Page

2 Subject to change without notice. Copyright ? Murata Manufacturing Co., Ltd. All rights reserved. Caution ? Read this design-in guide completely before installing the Murata Bluetooth mesh Node. ? Installation and maintenance must be done in accordance with local, state and national electrical codes (NEC) and requirements. ? For indoor use only. ? Note that the dimming terminals (D+/D-) and 12VDC terminals (12V/GND) are not electrically isolated. ? DO NOT open the plastic enclosure. ? DO NOT connect mains power to the terminals of the Murata Bluetooth mesh Node. ? DO NOT install if product has any visible damage. Disclaimer Murata disclaims all responsibility for any loss, injury, claim, liability or damage of any kind resulting from, arising out of or any way related to any errors in or omissions from this document and its content, including but not limited to technical inaccuracies and typographical errors. We do not vouch for the goods being fit for the use intended by the purchaser, not even if that use should have been mentioned to us, unless we have so committed ourselves in writing. 1PR-DG Rev. 1.2 Page

3 Subject to change without notice. Copyright ? Murata Manufacturing Co., Ltd. All rights reserved. Table of Contents 1. Introduction.4 2. Bluetooth mesh Node Overview.4 3. Shipped Components.4 4. Tools Required.5 5. Compatible LED Drivers.5 6. Wire Specifications

5 7. Not Recommended Practice.6 8. Terminal Assignment and Temperature Measurement Point Tc.6 9. Wiring Diagram.7 10. Dimensions.8 11. Installation

9 12. Recommended End-of-Line Test.9 13. LED Indicators.10 14. Factory Reset

10 15. Provisioning / Configurations

11 16. Lighting Control Scenarios.11 17. EnOcean BLE Switch.13 18. Occupancy Detection Pattern

14 19. General Information.14 20. Specifications

15 21. Supported Bluetooth mesh Models.16 22. FCC and Industry Canada Compliance Information.17 1PR-DG Rev. 1.2 Page

4 Subject to change without notice. Copyright ? Murata Manufacturing Co., Ltd. All rights reserved. 1. Introduction Murata'

s Bluetooth mesh Sensor Controller Node combines occupancy sensing, daylight harvesting, 0-10V dimming and Bluetooth mesh radio circuits into a small package that fits into various luminaires. The Sensor-less Controller Node is a variant without the sensors. When used with 0-10V dim-to-off LED drivers, it enables any lighting manufacturer to deliver wirelessly-controllable and sensor-equipped fixtures with minimal engineering effort. Murata'

s Node-equipped luminaires just need to be connected to mains power and can be simply configured using an intuitive mobile app. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes. By leveraging Bluetooth mesh, the first wireless standard for professional lighting applications which ensures unmatched scalability and reliability, the wireless lighting control system can be seamlessly expanded with Bluetooth mesh-certified products and/or compatible Bluetooth switches as needed. 2. Bluetooth mesh Node Overview 3. Shipped Components ? Murata Bluetooth mesh Sensor Controller Node (LBCC2ZZ1PR / LBCC2ZZ1PR-280) OR Murata Bluetooth mesh Sensor-less Controller Node (LBCC2ZZ1UY / LBCC2ZZ1UY-408) ? Locknut Bezel Housing Window for Ambient Light Sensor LED Indicators Locknut Occupancy Sensor Push-buttons 1PR-DG Rev. 1.2 Page