PDF《HMC743ALP6CE》

VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT

1 HMC743ALP6CE v00.

1212 0.5 dB LSB GaAs MMIC DUAL 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC -

4 GHz Functional Diagram Electrical Specifications, TA = +25° C,

50 Ohm System Vdd = +5V, Vcc = +5V The HMC743ALP6CE is ideal for: ? Cellular/3G Infrastructure ? WiBro, WiMAX &

LTE/4G ? Microwave Radio &

VSAT ? Test Equipment and Sensors ? IF &

RF Applications -45 to +18 dB Gain Control in 0.5 dB Steps Power-up State Selection High Output IP3: +33 dBm TTL/CMOS Compatible Serial Control ±0.25 dB Typical Gain Step Error Single +5V Supply

40 Lead 6x6 mm SMT Package:

36 mm2 The HMC743ALP6CE is a digitally controlled variable gain amplifier which operates from DC to

4 GHz, can be programmed to provide

63 dB of gain control in 0.5 dB steps and delivers output IP3 of up to +33 dBm. The gain control interface accepts a three wire serial input word and allows independent or simultaneous control of two 6-bit digital attenuators. The HMC743ALP6CE also features a user selectable power up state and a serial output for cascading other serially controlled Hittite products. The HMC743ALP6CE is housed in an RoHS compliant 6x6 mm QFN leadless package, and requires minimal external components. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range

70 -

1000 700 -

4000 MHz Gain (Maximum Gain State) 15.5 18.5

6 13 dB Gain Control Range

63 63 dB Input Return Loss

18 19 Output Return Loss

15 17 dB Gain Accuracy: (Referenced to Maximum Gain State) All Gain States

70 -

350 MHz: ± (0.3 + 3.5%)

350 -

750 MHz: ± (0.3 + 5.0%)

750 -

1000 MHz: ± (0.3 + 4.0%) 0.7 - 1.7 GHz: ± (0.3 + 4.5%) 1.7 - 3.2 GHz: ± (0.3 + 4.0%) 3.2 - 4.0 GHz: ± (0.3 + 5.0%) dB dB dB Output Power for

1 dB Compression 17.5

17 dBm Output Third Order Intercept Point (Two-Tone Output Power=

8 dBm Each Tone)

33 28 dBm Noise Figure

6 7 dB Switching Characteristics

100 160

100 160 ns ns tRISE, tFall (10 / 90% RF) tON, tOFF (Latch Enable to

10 / 90% RF) Supply Current (Idd)

5 5 mA Supply Current (Icc)

82 102

82 102 mA Typical Applications Features General Description VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT

2 HMC743ALP6CE v00.1212 0.5 dB LSB GaAs MMIC DUAL 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC -

4 GHz Input Return Loss [1] Relative Gain Setting [1] (Referenced to Maximum Gain State) Maximum Gain vs. Temperature Output Return Loss [1] Bit Error vs. Frequency [1] Bit Error vs. Relative Gain State [1] (Major Frequencies)

70 to

1000 MHz Tuning

10 12

14 16

18 20

22 0 0.2 0.4 0.6 0.8

1 +25 C +85 C -40 C GAIN (dB) FREQUENCY (GHz) -70 -60 -50 -40 -30 -20 -10

0 0 0.2 0.4 0.6 0.8

1 RELATIVE GAIN (dB) FREQUENCY (GHz)

8 dB

16 dB 31.5 dB

63 dB -40 -30 -20 -10

0 0 0.2 0.4 0.6 0.8

1 RETURN LOSS (dB) FREQUENCY (GHz) 31.5,

63 dB 0, 0.5, 1, 2,

4 dB

16 dB -40 -30 -20 -10

0 0 0.2 0.4 0.6 0.8

1 RETURN LOSS (dB) FREQUENCY (GHz) 31.5,

63 dB

4 dB

0 dB -2 -1

0 1

2 3

4 0 0.2 0.4 0.6 0.8

1 BIT ERROR (dB) FREQUENCY (GHz)

63 dB 31.5 dB

16 dB -1

0 1

2 3

0 8

16 24

32 40

48 56

64 BIT ERROR (dB) RELATIVE GAIN SETTING (dB) 0.5 GHz 0.1, 0.3, 0.7, 0.9 GHz [1] Input Attenuator swept for

0 - 31.5 dB States and Output Attenuator swept for

32 -

63 dB States VARIABLE GAIN AMPLIFIERS - DIGITAL - SMT

3 HMC743ALP6CE v00.1212 0.5 dB LSB GaAs MMIC DUAL 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC -

4 GHz Relative Phase vs. Frequency [1] Step Error vs. Frequency [1] (Worst Case) Reverse Isolation [1] (Major States) Output P1dB vs. Temperature [2] Output IP3 vs. Temperature [2] Psat vs. Temperature [2]