PDF《285》

1/10 WE 10.

./.C RC

23 327/02.03

2 285 Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics 4WE

10 E3X/CG24N9K4型带插入式线圈接头 目录 特征 版权所有.没有博世力士乐公司的授权,该文档的任何部分都不许以任何方式翻版、编辑、复制或使用电子系统 进行传播.侵权将承担损害赔偿的责任. 该文档精心编制,所有内容经过严格校对,以保证准确性. 由于产品一直处于发展中,我们必须保留修订的权利,对于因此而产生的任何不完整或不准确描述, 公司不承担责任. RC

23 327/02.03 代替:07.02 三位四通、二位四通和二位三通 带湿式电磁铁AC及DC方向阀 .WE 10../.C型 通径

10 3X 系列 4X 系列 最高工作压力

315 bar 最大流量

120 L/min ?

2003 by Bosch Rexroth AG, Industrial Hydraulics, D-97813 Lohr am Main - 直动式电磁铁操作的换向阀,标准型 - 安装面油口分布类型符合DIN

24 340 A 型, ISO

4401 或CETOP-RP

121 H, 安装底板参见样本RC

45 054 (单独订货) - 带有可拆卸线圈的湿式交流或直流电磁铁 - 电磁线圈可旋转90? - 更换电磁线圈时,不必打开阀的压力密封腔. - 电气接线可单独接线或集中接线 - 可选,手动应急操作 - 低换向击型参见样本RC

23 183 - 电感式终点开关 (接触式和非接触) 参见样本 RC

24 830 内容 页码 特征

1 订货型号 2,

3 图形符号

3 接线插头

3 功能说明、剖面图

4 技术数

5 性能曲线

6 性能极限 6,

7 元件尺寸 8,

9 优选型号

10 HAD5958/98 B1_0285-0294 7/22/04, 10:32 AM

1 2/10 RC

23 327/02.03 WE 10../.C

2 3 actuator ports =

3 4 actuator ports =

4 Nominal size

10 =

10 Symbol e.g. C, E, EA, EB etc. C for possible versions see page

3 Series

30 to

39 C individual connection = 3X (30 to 39: unchanged installation and connection dimensions) Series

40 to

49 C central connection = 4X (40 to 49: unchanged installation and connection dimensions) With spring return = No code Without spring return, with detent = OF Without spring return = O Wet pin solenoid (oil immersed) with removable coil = C

24 V DC = G24

230 V AC 50/60 Hz = W230

205 V DC = G205 1) Ordering details for other voltages and frequencies see page 5. With protected hand override (standard) = N9 Without hand override = No code Hand override with protective cap = N Types of electrical connections Individual connection;

with component plug = K4 2) DIN EN

175 301-803, without plug-in connector Central connection;

cable entry in cover with indicator lamp = DL Central connection;

central connection in cover with indicator light (without angled plug-in connector) = DKL 3) Accessories With inductive limit switch (for ordering details see catalogue sheet RE

24 830) Without limit switch = No code Without cartridge throttle = No code Throttle ? 0.8 mm = B08 Throttle ? 1.0 mm = B10 Throttle ? 1.2 mm = B12 NBR seals = No code FKM seals = V (other seals on request) Attention! The compatibility of the seals and pressure fluid has to be taken into account! Further details in clear text WE

10 C * 2) Plug-in connectors must be ordered separately (see page 3). 3) Plug-in connector (Material No. R900005538) must be ordered separately. Used where the flow >

than the perforamce limit of the valves effective in P port Preferred types, see page 10, are readily available AC supply (permissible voltage tolerance ± 10%) Nominal voltage of the DC solenoid when used with an AC supply via rectifier Order detail