PDF《E6B2》

电话:(86)21-5037-2222 技术咨询热线:400-820-4535

网址:http://www.fa.omron.com.cn 数据等最新版商品目录、手册中记载的保证・免责事项内容后 再使用. a 2011年3月CWZ6C 3.3Ω Blue 0V Blue 0V Blue 0V Blue 0V 35mA max. 20mA max. 35mA max. Brown

5 to 24V DC OUTPUT DC30V max. CWZ3E CWZ5B Brown

5 to 12V DC Brown

12 to 24V DC Brown 5V DC OUTPUT OUTPUT 3.3Ω 3.3Ω 2KΩ CWZ1X Main circuit Main circuit Main circuit Black : OUTPUT A White : OUTPUT B Orange : OUTPUT Z Black : OUTPUT A White : OUTPUT B Orange : OUTPUT Z OUTPUT Black : OUTPUT A White : OUTPUT B Orange : OUTPUT Z Black : OUTPUT A Black/Red :OUTPUT A White : OUTPUT B White/Red :OUTPUT B Orange : OUTPUT Z Orange/Red : OUTPUT Z Main circuit CWZ5G 30mA max. 7.5Ω 7.5Ω 24Ω 30mA max. Main circuit Brown

12 to 24V DC OUTPUT Black : OUTPUT A White : OUTPUT B Orange : OUTPUT Z Blue 0V Precautions for Correct Use 1)Since the product consists of high-precision components, handle it with utmost care. 2)Be careful not to expose the product to water or oil. 3)Be sure to turn off the power supply before wiring.If the output line contacts the power supply line while the power is being supplied,the output circuit may be damaged. 4)If the product is mounted and wired with a cord,do not pull the cord with force greater than 29.4 N. 5)Be careful not to apply excessive load to the shaft. Excessive load may cause the product break. Especially when linking with a chain,timing belt, or gears, connect a separate bearing before the coupling to the product. 6)If an installation error such as misalignment is too large,(in case using the coupling or without coupling) the shaft will be subjected to an excessive load which will damage it or shorten its service life.Be careful when installing. 7)When inserting the shaft in the coupling,do not use excessive force (by striking it with hammer,for example). 8)When installing or removing the coupling,do not apply an excessive being,compressing,or tensile force. 1)Do not use the product in excess of the rated voltage. Applying voltages beyond the rated voltage range may cause the product to breakor burn. 2)Avoid wiring the product'

s cables parallel to power lines or high-voltage lines.Doing so may cause the priduct to malfunction due to induction or may cause the damage the product. 3)If surge occurs in the power supply,connect a surge absorber between the power supply terminals to absorb the surge. Minimize the wiring ........