PDF《F Series》

F Series 适用RCDL系列 久德电子有限公司 台中市西区福人街11号TEL:04-23729418 jetec.

[email protected] www.jetec.com.tw F-series (F012, F018, F110, F131) Input features With the F-series, the following signals types can be processed: ? Flow measurement: Turbine sine wave (coil) pick-ups, reed switches, hall-effect sensors and other active or passive NPN/PNP pulse signals, NAMUR sensors and

2 or

3 wire (0)4 - 20mA or

0 - 10V DC. ? Temperature measurement: 2,

3 or

4 wire PT100 (PRTD) elements, thermocouple as well as

2 or

3 wire (0)4 - 20mA or

0 - 10V DC signals. Linearization of the input signal, data filter functions and square root calculation are all available to process the input signals. Output features Related to the functionality of the selected model, the follow- ing output features are available: ? Analog output proportional to the flow rate. The active, passive or isolated (0)4 - 20mA or

0 - 10V DC analog output can also be used to control actuators with the PI(D) controllers. ? Transistor or relay outputs for high and low alarms, scaled pulse output, flow-direction as well as the control of valves/relays in batch and level control applications. ? The RS232, RS485 or TTL interface makes it possible to communicate remotely, even with the battery-powered unit. All software parameters can be monitored and modified in addition to the usual transfer of data using the ModBus? protocol. Models F012 Display with external power supply or battery powered F018 Alarm or pulse output, analog output with HART communication F110 Pulse output, analog output, optional RS232/RS485 F131 Bach controller with pulse output, analog output,

2 batching outputs, optional RS232/RS485 Options for hazardous area installation The F1-series can be supplied with certified intrinsically safe to ATEX and IECEx. The basic F0-series have got the following certifications with an ambient temperature of -40 °C to +70 °C (-40 °F to +158 °F). ? The ATEX markings for gas and dust applications are: II

1 G Ex ia IIC T4 II

1 D Ex iaD

20 IP 65/67 T

100 °C. ER-500 适用RCDL系列 久德电子有限公司 台中市西区福人街11号TEL:04-23729418 [email protected] www.jetec.com.tw Flow monitor ER-500 Input Frequency range

1 to

3500 Hz Frequency accuracy ±0,1 % Over voltage protection 28V DC Outputs Analog: 4-20mA Totalizing pulse Opto-isolated (ISO) open collector transistor, non-isolated open drain FET. Status alarms Open collector transistor, adjustable flow rate with program- mable dead band and phase. ModBus? ModBus? RTU over RS485,

127 addressable units / 2-wire network,

9600 baud, long integer and single precision IEEE754 formats;

retrieve: flow rate, job totalizer, grand totalizer, alarm status and battery level;

write: reset job totalizer, reset grand totalizer Protection class NEMA 4X/IP

66 More information you get in the data sheet Flow monitor ER-500 . Features ? Compact size ? High accuracy and repeatability (0,05 %) ? Flexibility of installation options ? Robust alarm parameters provide faster warning when something changes in the process or pipeline. ? Advanced connectivity options allow you to connect meters to your network for remote monitoring and process automation capabilities. ? Flexible power options include battery and 4-20mA loop power, providing a number of benefits including: The ability to install in remote location and be up and running immediately. ? Maintains readings and settings in the event of a power loss, and prolong the life of the batteries for up to