PDF《ET30X210C PS2 Game Pad》

28 BD I CROSS button analog signal input pin.

29 BL I SQUARE button analog signal input pin.

30 BU I TRIANGLE button analog signal input pin.

31 R1 I R1 button analog signal input pin.

32 R2 I R2 button analog signal input pin.

33 R3 I (internally pull-high) R3 button analog signal input pin.

34 RX I Right Stick'

s X-axis analog signal input pin.

35 RY I Right Stick'

s Y-axis analog signal input pin.

36 ACK O (open-drain) SPI Output ACK

37 SCK I SPI Clock input from PS console

38 CS I SPI CS signal from PS console

39 SDO O (open-drain) SPI Output data

40 SDI I SPI Command from PS console

41 SA I Mapping Function Enable / Disable pin. Direction buttons maps to LJ;

function buttons (?, ,*,Ο) Buttons maps to RJ. Tie to GND: Disable Mapping function Tie to VCC: Enable Mapping function

42 SB I Center Dead Zone range select pin. (The option is valid only if center dead zone function is enabled. SC ties to GND) Tie to GND: ±15 scales equals to 0x80 Tie to VCC: ±8 scales equals to 0x80

43 SF I SSM (Select + Start = Mode) Key Function Tie to GND: Disable SSM key function Tie to VCC: Enable SSM key function

44 SG I (Dual shock1 or Dual shock) select pin. (The option can choose the Dual shock1 or Dual shock2) Tie to GND: Dual shock1 Tie to VCC: Dual shock2 ET30X210C PS2 Game Pad This specification is subjected to be change without notice. 2004/02/18 V1

4 ? Pin Assignment ET30X210C

44 PIN QFP

43 42

41 40

39 38

36 34

32 31

30 29

28 27

26 25

24 1

2 3

4 5

6 7

8 9

10 11

12 13

14 15

16 17

18 19

20 21

22 SELECT DL BM MODE START FUNCLR TURBO SLOW SDO CS SCK ACK SDI L2 L3 L1 SE SF VCC BD BL MODE_LED R2 BU R1 R3 BR DR OSCI SD LX LY SM DD

23 S/T_LED

37 35 SB SC

44 RX SA RY

33 GND DU NC SG 4. Function Description ? Turbo Function C The turbo function allows to set

2 button as Rapid Fire . How many keys can be set with Turbo function. (1) DR, DL, DU, DD, BR, BL, BU, BD, L1, L2, R1, and R2. How to set up Turbo function (1) Push and hold the turbo button (2) Push the specific button, which requires the rapid fire. (3) Release this specific button first then release the Turbo button. The Turbo function is set into this specific button. (4) As the Turbo function is set, the S/T LED will blink as the related speed as Turbo signal is sent out. How to clear Turbo function (1) If want to clear single Turbo function button has been set: Execute the same procedure as how to set Turbo function. (2) If want to clear all Turbo functions have been set: Simply press Function clear button if available. ET30X210C PS2 Game Pad This specification is subjected to be change without notice. 2004/02/18 V1

5 How to Play Turbo function (1) After Turbo function has been set on specific button, press and hold this button, then the Turbo signal will be send out as long as players hold this button. How to adjust the speed of Turbo function There are

4 speed for Turbo function, 75m second, 100m seconds, 150m seconds, and 200m seconds. The default will be 100m seconds. (1) Press the R3 button and hold it (2) Then press DU/DD to select faster/slower speed. At the mean time, the S/T LED will blink at the speed related to different Turbo speed as below. 100m seconds is the default setting. Turbo Speed S/T LED Speed 75m second 150m second 100m second 200m second 150m second 300m second 200m second 400m second ? Slow Function CSlow Action function is to slow down the game in order to supply players more time to react to fast events. How to set up / erase Slow function (1) Push the slow button to enable the slow function. (2) Push the slow button again to disable slow function Once the Slow function is enable, the S/T LED will blink as the related speed as Slow signal sending out. ? Function Clear FunctionC Turbo function clear pin How to clear Turbo function Simply press Turbo function clear button, and all the turbo functions have been set are reset. ? Pin Option Selection SA: Mapping Function En/Disable pin. Direction buttons map to left joystick;