PDF《UDC》

11 质量检查与验收测量.34 11.1 一般规定.34 11.2 质量检查.34 11.3 质量验收.35

12 第三方测量与监测

36 12.1 一般规定

36 12.2 第三方测量

37 12.3 第三方监测

37 附录 A 控制测量.39 附录 B 锚箱平面测量装置.41 附录 C 轨道梁线形测量.42 附录 D 变形监测标石埋设.43 附录 E 高程控制点标石埋设

44 本标准用词说明.46 引用标准名录.47 附: 条文说明

47 1 Contents

1 General Provisions…1

2 Terms…2

3 Control Survey…4 3.1 General Requirements.4 3.2 Horizontal Control Survey

4 3.3 Vertical Control Survey.8

4 Topographic Survey and Special Survey…9 4.1 General Provisions.9 4.2 Topographic Survey.10 4.3 Special Survey.11

5 Viaduct Construction Survey…13 5.1 General Provisions.13 5.2 Construction Survey of Pier Foundation And Pier Column.13 5.3 Bent Cap Construction Survey

14 5.4 Anchor Box Construction Survey.14

6 Tunnel Construction Survey…16 6.1 General Provisions.16 6.2 Connection Survey.16 6.3 Tunnel Construction Control Survey.17 6.4 Tunnel Boring Survey.18 6.5 Survey after Tunnel Holing Through.18

7 Production and Installation Survey of Track Beam…19 7.1 General Provisions.19 7.2 Survey of Track Beam Production.19 7.3 Survey of Track Beam Installation and Linear Adjustment

23 7.4 Installation Survey of Turnout.23

8 Depot Survey…24

9 Equipment Installation Survey…25 9.1 General Provisions.25 9.2 Installation Survey of Contact Wire System

25 9.3 Installation Survey of Platform Edge and Safety Gate or Barrier Door

25 9.4 Installation Survey of Civil Air Separation Door.26 9.5 Installation Survey of Maintenance Platform.26 9.6 Installation Survey of Signal and Line Mark

27 10 Deformation Monitoring…28 10.1 General Provisions.28

2 10.2 Control Survey of Deformation Monitoring

29 10.3 Deformation Monitoring during Construction Stage.31 10.4 Deformation Monitoring to Lines in Operation

32 10.5 Data Processing and Information Feedback of Deformation Monitoring.33

11 Quality Inspection and Acceptance Survey…34 11.1 General Provisions

34 11.2 Quality Inspection.34 11.3 Quality Acceptance

35 12 Third Party Survey and Monitoring…36 12.1 General Provisions.36 12.2 Third Party Survey.37 12.3 Third Party Survey Monitoring

37 Appendix A: Control Survey…39 Appendix B: Anchor Box Plane Measuring Device…41 Appendix C: Linear Survey of Track Beam…42 Appendix D: Monument Burying for Deformation Monitoring…43 Appendix E: Monument Burying of Vertical Control Points…44 Explanation of Wording in This Standard…46 Quoted Standard List…47

1 1 总则1.0.1 为了保障跨座式单轨交通建设和运营质量和安全,加强跨座式单轨交通工程测量管理,统 一工程测量技术要求,遵循技术先进、经济合理、质量可靠和安全适用的原则制订本标准. 1.0.2 本标准适用于跨座式单轨交通线网规划、新线路建设、既有线路改造以及运营线路维护的 工程测量工作. 1.0.3 跨座式单轨交通工程测量的平面坐标和高程系统应与所在城市一致. 当与城市其他形式轨道 交通工程结构或市政工程联系时,应采用统一的平面坐标和高程系统,当平面坐标和高程系统不一 致时应建立转换关系. 1.0.4 跨座式单轨交通工程测量应以中误差作为衡量测量精度的标准,以二倍中误差作为极限误 差. 1.0.5 测量作业使用的仪器和设备应根据国家有关法规,定期进行检验与校正.作业中仪器状态 应满足作业要求. 1.0.6 跨座式单轨交通工程测量工作应根据轨道交通工程安全生产措施和应急预案要求,编制测 量应急预案. 1.0.7 采用和推广经鉴定并批准的工程测量新技术、新方法、新设备和新软件时,应符合国家相 关部门的规定. 1.0.8 跨座式单轨交通工程测量除应符合本标准外,尚应符合国家现行有关标准或规范的规定.