PDF《DATASHEET》

8 VDRVOUT PWR Output of internal LDO for powering the internal gate driver block. Place a 10?F ceramic capacitor at this pin. LDO output is dedicated to powering the internal gate driver stage only. Do not use this LDO for any other purpose. 9, 12, 23, 31,

34 PGND PWR Power ground. Refer to the PCB Layout Guidelines on page

20 for the PGND pad connections and decoupling capacitors placement.

10 VDRVIN PWR Input supply to internal LDO for powering internal gate driver block. An RC filter is required if the VIN supply is shared. Refer to the PCB Layout Guidelines on page 20.

11 VIN PWR Main........